2013/06/24
Practice the 2D Coordinate
Practice the 2D Coordinate in AutoCAD 2012
a. Cartesius Coordinate
In this example, You will make a rectangular object with point placement : [5,5] - [20,5] - [20,10] - [5,10]. This is the step :
a. Cartesius Coordinate
In this example, You will make a rectangular object with point placement : [5,5] - [20,5] - [20,10] - [5,10]. This is the step :
- Open AutoCAD 2012
Picture 1.6 Button location of Dynamic iput
2. Look at Picture 1.6. You turn off Dynamut input button with clicking one time.
- Note:
Dynamic input is a features which displays the command that you type in the active cursor. So,
everything that you type will be appear in your cursor.
In my blog, I not used Dynamic input. So, this features is need to disabled.
Another way to disable or enabling Dynamic input features is with pressing F12 button on
keyboard.
3. You tipe a LINE command and press Enter for run it.
4. Now, you type you type in a value of 5,5 and press Enter.
5. Next, you type 20,5 and press Enter on the keyboard.
6. You type a value of 20,10 and press Enter.
7. You type a value of 5,10 and press Enter.
8. And the last one, you press C button on keyboard and press Enter.
9. The result of making a line will be display like Picture 1.6.1
2. You type RECTANG command and press enter.
3. Now, you click arbitrarily in AutoCAD screen.
4. Then, you type value of @20,10 and press enter.
Another way to disable or enabling Dynamic input features is with pressing F12 button on
keyboard.
3. You tipe a LINE command and press Enter for run it.
4. Now, you type you type in a value of 5,5 and press Enter.
5. Next, you type 20,5 and press Enter on the keyboard.
6. You type a value of 20,10 and press Enter.
7. You type a value of 5,10 and press Enter.
8. And the last one, you press C button on keyboard and press Enter.
9. The result of making a line will be display like Picture 1.6.1
Picture 1.6.1 The result of making Rectangular object
b. Polar Coordinate
In this example, you will make a rectangular object with size 10x10 using LINE command with Polar coordinate.
- First, you erase all object in AutoCAD with ERASE command. After this, type ALL and press Enter. Press enter once again for excecute erasing.
- You type LINE command and press Enter.
Picture 1.6.2 Clicking position for start making Rectangle
3. Look at Picture 1.6.2. You click arbitrarily in AutoCAD screen.
4. Next, you type value @10<0 and press enter.
5. You type again value @10<90 and press enter.
6. You type again value @10<180 and press enter.
7. And the last, you press C button and press enter for closing making line.
Picture 1.6.3 The result of making Rectangular 10x10
c. Relative Coordinate
In this example, you will make a Rectangular object with size 20x10 using RECTANG command with Relative coordinat.
- Note :
RECTANG command is a command which used for making Rectangular object faster.
- First, you erase all object with ERASE command. Then type ALL and press enter. Press enter once again for excecute erasing.
3. Now, you click arbitrarily in AutoCAD screen.
4. Then, you type value of @20,10 and press enter.
Picture 1.6.4 The result of making Rectang size 20x10
Subscribe to:
Post Comments
(Atom)
About Me
Hi, My name is M. Aditya F. and I am a student from SMKN 1 Cibinong. I'm hard thinking. To know more about me click here
0 comments:
Post a Comment