2013/07/05
ARC and CIRCLE command
ARC and CIRCLE command in AutoCAD 2012
Do you know what is ARC and CIRCLE command? Do you know what is usefulness in AutoCAD ? This is the explanation :
Practicing making Arc and Circle object
a. Making Arc
In this example, you will make an arc object with three point.
Specify first point of circle's diameter : (click P1)
Do you know what is ARC and CIRCLE command? Do you know what is usefulness in AutoCAD ? This is the explanation :
- ARC command
- CIRCLE command
Practicing making Arc and Circle object
a. Making Arc
In this example, you will make an arc object with three point.
- First, you erase all object with ERASE command. After this, type ALL and press enter. And then, press enter once again.
- You type ARC command and press Enter.
Picture 1.7 Clicking position for making Arc object
3. Look at picture 1.7. You click in P1, P2, P3 position and press enter.
Picture 1.7.1 The result of making Arc object
4. Look at picture 1.7.1 You make an three point arc object with follow the picture hint and this step.
Command : ARC
Specify start point of arc or [Center] : (click P1)
Specify second point of arc or [Center/End] : (click P2)
Specify end point of arc : (click P3)
b. Making Circle with center point method
The first example for making a circle is make a circle with center point method. In here, you must set center point first, and then you set the radius or diameter from the circle.
For this example you requested to make a center method circle with radius of the circle 5.
- First, you erase all object with ERASE command, and type ALL. And then, you press Enter once again.
- You type CIRCLE command and press Enter. Then you click in center of AutoCAD 2012 screen, and type radius of the circle 5. Below is a complete explanation.
Command : CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)] : (click in clik in center of AutoCAD
2012 screen)
Specify radius of circle or [Diameter] : 5
Picture 1.7.2 The result of making center point method circle with radius 5
c. Making Circle with three point method
Another method to make a circle is You must set three point for make a circle object.
- You erase all object with ERASE command. Type ALL and press Enter. And press Enter once again.
- You type CIRCLE command and press Enter.
Picture 1.7.3 Clicking position for making Circle object
3. Look at picture 1.7.3. You click in P1, P2, P3 position and press enter.
Picture 1.7.4 The result of making Circle object
4. Look at picture 1.7.4 You make an three point circle object with follow the picture hint and this step.
Command : CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)] : 3P
Specify first point on circle : (click P1)
Specify second point on circle : (click P2)
Specify third point on circle : (click P3)
d. Making Circle with two point method
The next method for making a circle is You must set two point for make a circle object.
- You erase all object with ERASE command. Type ALL and press Enter. And press Enter once again.
- You type CIRCLE command and press Enter.
Picture 1.7.5 Clicking position for making Circle object
3. Look at picture 1.7.5. You click in P1, P2 position and press enter.
Picture 1.7.6 The result of making Circle object
4. Look at picture 1.7.6 You make an three point circle object with follow the picture hint and this step.
Command : CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)] : 2P
Specify second point of circle's diameter : (click P2)
e. Making Circle with TTR method
TTR is acronym from tangent-tangent radius. The function of this method is that you can make a circle between two objects. For examples you can use to make a circle in a corner of the object.
In this example you create an object using the RECTANG command. You create a circle object in one corner of the square.
- You erase all object with ERASE command. Type ALL and press Enter. And press Enter once again.
- You make Rectangular object size 10x10 with RECTANG command.
Command : RECTANG
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width] : (click in clik in center of
AutoCAD 2012 screen)
Specify other corner point or [Area/Dimension/Rotation] : @10,10
Picture 1.7.7 Clicking position for making Rectang object
3. Look at picture 1.7.7. That is clicking position to make circle with TTR method.
Picture 1.7.8 The result of making circle object with TTR method
4. Look at picture 1.7.8 You make a circle in bottom left corner of rectang with radius 2 using TTR
method. Follow the picture hint and this step.
Command : CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)] : TTR
Specify point on object for first tangent of circle : (click P1)
Specify point on object for second tangent of circle : (click P2)
Specify radius of circle <3.3917> : 2
Subscribe to:
Post Comments
(Atom)
About Me
Hi, My name is M. Aditya F. and I am a student from SMKN 1 Cibinong. I'm hard thinking. To know more about me click here
0 comments:
Post a Comment